11. With the green clip released, pull the finisher panel firmly towards the center of the vehicle and carefully remove. Repeat for other side.
Figure 9
12. With the headlight finisher removed on each side, firmly grasp the bumper cover at the wheel well and pull firmly out until both internal clips have released. Repeat for other side.
13. Carefully remove bumper cover and set face down on a padded surface.
Figure 10
14. Remove the valance from the bumper cover by depressing the locking tang on each blue clip with a small screwdriver or pick and pulling on the large tab. Figure 11 and 12.
Blue clips
Figure 11
Figure 12
6
102875A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook