8. Remove the ¼-turn fastener (each side) using a wide slotted screwdriver and turning 90° counter clockwise.
Figure 6
9. Remove the screw using a 10mm socket. NOTE: The screw is not visible and must be reached through an existing cutout in the wheel well liner.
Figure 7
10. Remove the headlight finisher panel by squeezing the green clip and push away from the vehicle. Repeat for other side.
Green clip
Figure 8
5
102875A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook