INSTALLATION INSTRUCTIONS
1. Remove the two screws at the top edge of the grille using a 10mm socket.
2. Remove the two push pins at the outer corners of the grille.
3. Pull the grille out/forward, being careful to not break the clips located at the bottom corners of the grille.
Figure 1
4. Unplug fog lights by squeezing the locking tab socket. Repeat for other side.
NOTE: If equipped, unplug parking sensors.
Figure 2
5. Remove the three top bumper plastic push pins.
Figure 3
6. Remove the two bumper cover bottom center screws.
Figure 4
7. Remove the two bumper cover corner screws (each side).
Figure 5
4
102875A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook