INSTALLATION INSTRUCTIONS
17. With the winch and mount close to the front of the vehicle, route the winch power cables up toward the engine bay.
NOTE: Make sure to route wires/cables away from sharp edges, heat and moving parts.
Figure 11
18. Continue routing the cables through the hole behind the driver side headlight, around the washer fluid reservoir and towards the vehicle battery.
Figure 12
19. Insert a nut plate (A2) into each frame rail as shown. NOTE: Ensure that the nut plate aligns with the existing holes in the mounting pad. Repeat for other side.
A2
Figure 13
105843A0
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
Powered by FlippingBook