INSTALLATION INSTRUCTIONS
26. Using the factory bumper reinforcement bar hardware, secure winch mount in the original reinforcement bar mounting holes. Repeat for other side.
27. Using bolts (B1) secure winch mount to vehicle frame rail and into nut plates. NOTE: It will be easiest to access the bolts through the access ports in the front of the winch mount. The bolts are shown below with the stock bumper removed for clarity. Repeat for other side.
A2
Factory bolts
28. Tighten all hardware to proper torque specifications. Your installation is now complete.
MAINTENANCE / CARE 1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or deformed. 2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced. 3. Check all cables prior to use. Replace cables that look worn or frayed. 4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDER- STAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
105843A0
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
9
Powered by FlippingBook