INSTALLATION INSTRUCTIONS
20. Snap the factory temperature sensor into the larger hole of the new temperature sensor bracket (A3). 21. Install sensor / bracket assembly to original mounting location on the inner grille using one M6 bolt (B2) and nut (B3). NOTE: Bracket not shown to clarify location of bolt hole and sensor.
CAUTION Always use assistance when moving or lifting heavy parts.
22. Reinstall the stock bumper ( without air dam and center valance ). NOTE: Ensure that the winch power cables pass through the opening left by the center valance.
Figure 14
23. Install fairlead to winch mount.
24. Install winch to mount following your winch installation instructions.
TIP: We recommend using a rolling floor jack or similar for winch mount to vehicle installation.
25. Slide the winch mount in and up into position ( be sure to clear the control pack on winch ).
105843A0
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
8
Powered by FlippingBook