11. Attach the left and right side frame extension brackets (A2) to vehicle frame, using the 7/16-14 X 4 bolt (B5), flat washer (B3), lock washer (B2) and nut (B4) and the M12 bolt (B7) and 1/2” flat washer (B6).
B5, B3, B2 and B4
A2
B7, B6
TIPS: Drop metal skid plate down to allow access to install. The 7/16 bolt goes through the rear of the bracket and through the frame, see exploded view on page 3. The 12mm bolt will screw into the vehicles existing threaded hole. 12. Do not tighten until winch mount is installed. Repeat for other side.
Figure 9
13. Remove the plastic shrouds (each side) of radiator. NOTE: You will be reinstalling.
Figure 10
CAUT I ON
• Always use assistance when moving or lifting heavy parts.
Reinstall factory hardware
14. With assistance, align the mount (A1) to stock frame rail and new extension bracket (each side).
Loosely, attach to frame rail and extension bracket. NOTE: Refer to exploded view on page 3.
a.
Reinstall the four previously removed hex head bolts (each side). Install provided hardware (B1, B3, B2 and B4).
B1, B3, B2, B4
b.
A1
Using slots in mount, center the mount to front of vehicle. Once centered, tighten hardware.
Figure 11
6
100028A0
©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook