110912-install-instr-warn-ascent-hd

I N S T A L L A T I O N I N S T R U C T I O N S

1 5 . Carefully remove the four sensors and sensor housings from the bumper by spreading the housing clips out and pushing the sensor out simultaneously. Make sure to mark the position of each housing for installing into the bumper. Figure 16.

1 6 . Remove the sensor housings from the bumper by pressing the retainer clips in on the sides and pushing the housing out. Figure 17.

1 7 . Install the two mounting brackets (22225 and 22226) using a 15mm and 18mm socket wrench and the OEM tow hook bolts and bracket bolts removed during steps 12-13. Figure 19.

1 8 . Reverse the process in step 16 to install the heater plug into the driver side mounting bracket. Reconnect the heater plug wiring harness before mounting the bumper. Figure 20.

110912-4