110912-install-instr-warn-ascent-hd

I N S T A L L A T I O N I N S T R U C T I O N S

11. As you remove the bumper, unplug the sensor, heater plug, and lower louver harnesses located on the driver side of the truck. Figure 12.

12. If equipped, remove the factory tow hooks by using an 18mm socket wrench to unfasten the two (2) bolts in the frame. Figure 13.

13. Use a 15mm socket wrench to take four (4) bolts holding the mounting plates to the frame horns. Figure 14.

1 4 . If equipped, remove the engine heater plug located on the driver side of the truck bumper. Push the bumper in against the spring and turn counterclockwise, once unclipped pull out from the bumper. Figure 15.

110912-4