10. Before installing winch, carefully remove entire assembly (latch, crossbar, wire harness) and set aside (be careful of cables that will still be attached to vehicle).
Crossbar, Latch, Wire harness
11. Remove blue plastic clip from inside of the lower valance (one on each side) to start releasing the valance from front plastic.
Remove lower valance clips
Figure 8
12. Remove the four fasteners from underneath the bumper.
Outer vantage point of lower valance clip - removed in previous step
Remove
Figure 9
13. Carefully work around valance, unclipping as you go to release completely.
Figure 10
6
100125A1
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook