14 Unclip and remove the plastic cover plate attached to the aluminum cross bar.
Unclip
Figure 11
15. Remove the six nuts (three on each side) securing the aluminum cross tube.
Remove six (6) cross tube nuts
Figure 12
16. Shift cross tube to one side and tilt outwards.
17. Remove the three nuts securing the aluminum frame extension on the side you tilted cross tube out from. Retain nuts as you will be reusing them . 18. Remove extension. NOTE: With one extension removed, you should now be able to shift cross tube over and back towards vehicle, this will allow the tube to freely release from vehicle.
19. Once the cross tube is out completely, remove second aluminium frame extension, same way as the first.
Remove
Figure 13
7
100125A1
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook