I N S T A L L A T I O N I N S T R U C T I O N S
13. Insert both brackets (22226 & 22227) into the frame rail ends and very loosely install the four (4) shorter OEM bolts into the frame rail end flange and two (2) longer OEM bolts into the frame rail end. just supporting both brackets. (Figure 12)
Figure 12
14. Using the provided four (4) bolt stacks of ¼”-20 yellow zinc hex bolt, flat washers, lock washer, and hex nut, loosely install the factory louver system. (Figure 13) (50250-HW)
Figure 13.
15. Using a 15mm socket wrench fully tighten down the four (4) OEM frame end bolts on both brackets (22226 & 22227). (Figure 12)
16. Using both a 18mm socket wrench and 18mm open end wrench, fully tighten down the four (4) OEM long frame bolts on both frame rails (22226 & 22227). (Figure 12)
8
Powered by FlippingBook