11. Remove the push pin on outer corner of headlight finisher panel (each side).
Figure 9
12. Pull the finisher panel firmly towards the center of the vehicle and carefully remove. Repeat for other side.
Figure 10
13. With the headlight finisher removed on each side, firmly grasp the bumper cover at the wheel well and pull firmly out until both internal clips have released.
14. Repeat for other side.
15. Carefully remove bumper cover and set face down on a padded surface
Figure 11
6
102877A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook