37. From underneath vehicle, install one factory nut (removed in step 15) on bolts (A3) installed above.
38. From underneath vehicle, remove factory frame bracket bolt and set aside.
39. Repeat for other side.
Figure 29
40. Install frame bracket strap (A2) and reinstall factory bolt in same position just removed.
A3 bolt and Factory nut
41. Install kit bolt (A3) in other hole and secure with one of the remaining factory nuts.
42. Repeat for other side.
Factory bolt
A2
Figure 30
43. Reinstall grille.
44. Push the grille down into the locking tabs and slots located at the bottom corners.
Figure 31
45. Reinstall the outer push pins and center screws.
License mounting location
46. Install license plate with hardware included (A4 & A5).
Figure 32
11
102877A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook