5. With both alignment pucks seated into the plow mount the retaining pins can be inserted. Once inserted the retaining clips on the pins can be clipped onto locking tab on plow mount. See Plow operator guide “Installing the Plow” for more information.
6. With both retaining pins secure, pull out the line from the winch.
7. Pull the retaining pin on the plow assembly that is securing the pulley assembly. With the pulley assembly loose, place the pulley assembly over the winch line and reinstall the pulley assembly onto the push tube assembly securing the pulley assembly with the retaining pin. See “Double Line Rigging” in the Plow Lift section of the Plow Operators Guide. Figure 7
Figure 7
8. Connect the termination strap to the front bumper. The loop of the strap should be place as high as possible on the bumper. See Figure 8.
Loop of strap
9. Hook the winch line to the loop on the termination strap. See Figure 9.
10. Turn the ignition switch to ON, and operate the winch to lift and lower the plow. The plow is now ready for operation. Read the Plow Operators Guide before operating plow.
Figure 8
Helpful Hints When removing the plow assembly from the plow mount, use a block under the base of the push tube assembly to hold up the assembly at the connection height. This will aid in the next connection on the plow assembly.
Figure 9
WARN® INDUSTRIES
PAGE 6
83511A3
Powered by FlippingBook