Installation ( continued )
4. Insert the plow flange (A3) into the plow mount and install the pins. With the flange installed, adjust the plow mounts. The plow mounts should be straight with the ears of the flange. When the plow mount fasteners are tightened, the flange should be able to slide in the plow mounts easily. See figure 4.
Flange placed in plow mounts
5. With the flange in place, tighten all fasteners to torque specification listed.
Figure 4
6 With the plow mounts secure, the flange can be install on the push tube assembly. See Warn plow push tube instruction manual for installing plow mount flange. Figure 8
Install fastener to secure flange to push tube assembly
V. Operation Attaching the plow to the vehicle 1. Stage the plow assembly on level solid ground. See Plow operator guide “Installing the Plow” for more information. 2. SLOWLY drive the vehicle up to the plow assembly with the vehicle as square to the plow as possible. 3. Turn off the vehicle and set the parking brake. Lift the plow mount flange end of the push tube assembly up to the plow mount on the vehicle. Insert the plow mount flange into the plow mount receiver. See Figure 6. 4. Double check that the plow is fully engaged with the alignment pucks on the plow mount flange. The alignment pucks should be fully seated into the plow mount cradle feature.
Figure 5 Install fasteners
Figure 6
WARN® INDUSTRIES
PAGE 5
83511A3
Powered by FlippingBook