23. Re-install the modified front plastic over the top of the mount.
24. Plug fog lamps in.
Figure 16
25. Snap/clip plastic back into place near wheel well.
26. Install the three screws from the front wheel well (each side) separating the exterior plastic from the inner fender.
Install
Figure 17
27. Re-install grill, by reattaching the four push/pull clips along the backside of the grill.
Figure 18
29. Re-install the screw holding the top center of the grill and the two push pull clips towards the outer top side.
Figure 19
8
100028A0
©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook