INSTALLATION INSTRUCTIONS
1. Remove license plate.
Figure 1
2. Unplug radar sensor (for models equipped).
Unplug
Figure 2
3. Remove the grill by removing the two screws toward the center and the two push/pull clips on top to the outside of grill. 4. Grab the grill from the middle outer section and carefully pull straight out. NOTE: Be sure to not break the remaining grill tabs.
Remove
Unclip
Figure 3
4
100125A1
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook