107228.A0 - install instr ascent hd

I N S T A L L A T I O N I N S T R U C T I O N S

28. With assistance, lift the bumper (22335) up to the brackets (22226 &22227) and secure it loosely using the provided four (4) bolt strips (20296) and eight (8) 1/2”-13, yellow zinc hex nut, flat washers, lock washer. (50250-HW) (Figure 21-22)

Figure 21

Figure 22

29. With assistance of two, lift and center the bumper to the vehicle and using an ¾” open end wrench, fully tighten down the eight (8) ½”-13 nuts securing the bumper (22335) to the brackets. (22226 & 22227)

30. Reconnect the factory wiring harness main connector and both fog lights (if equipped)