INSTALLATION INSTRUCTIONS
1. Remove the two screws at the top edge of the grille using a 10mm socket.
2. Remove the two push pins at the outer corners of the grille.
3. Pull the grille straight up, being careful to not break the clips located at the bottom corners of the grille.
4. Unplug fog lights by squeezing the locking tab socket. Repeat for other side.
Figure 1
NOTE: If equipped, unplug parking sensor.
Figure 2
5. Remove the three top bumper plastic push pins.
Figure 3
6. Remove the two bumper cover bottom center screws.
Figure 4
7. Remove the two bumper cover corner screws (each side).
Figure 5
4
102877A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook