I N S T A L L A T I O N I N S T R U C T I O N S
21. Place the 4x 1/2" bolt strips in the bumper with assistance, hold the bumper up to the brackets and fasten it in place with the provided 1/2" washers and hex nuts. Figure 21.
22. Fully tighten all mountain hardware and plug in the wiring harness.
M A I N T E N A N C E / C A R E 1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or deformed. 2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced. 3. Check all cables prior to use. Replace cables that look worn or frayed. 4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
104214A0
Powered by FlippingBook