I N S T A L L A T I O N I N S T R U C T I O N S
17. Reinstall the parking sensor housing into the new bumper in the same position and orientation in which they were removed from the OEM bumper. Use the provided epoxy and popsicle stick to adhere the housing to the bumper. NOTE: If bumper is not equipped with sensors, use the provided 1-1/4" plastic plugs to fill the sensor holes. Figure 17.
18. Carefully place the sensors into the housings once the epoxy has dried and feed the wiring harness through the bumper making sure to have the plug on the driver side. Plug in the ACC sensor. Figure 18.
19. Install the two light boxes (94888 and 94889) into the bumper ib tge RH and LH side resepectivly. Use the provided #10-24 bolts, flat and lock with nuts to attach them to the bumper and tighten them with the 10mm socket wrench and 3mm allen wrench (50246-HW). Figure 19.
20. Install the driver side and passenger side mountaing brackets (23102 and 23103) using the OE bolt strips along with the provided M14 hex head bolts, washers and nuts. Figure 20.
©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
104214A0
Powered by FlippingBook