INSTALLATION INSTRUCTIONS
1. Remove the plastic tow hook covers by gently pulling on them to release the clips.
5. Using an E6 torx socket remove the three studs that attach the ACC bracket to the vehicle.
2. From the driver side frame rail, disconnect the bumper electrical harness.
6. Using an 18mm socket wrench, remove the four bolts that attach the bumper to the tow hook brackets (each side).
3. If applicable, remove the adaptive cruise control (ACC) sensor from its mounting bracket.
7. Using a 15mm socket wrench, remove the two bolts that attach the bumper reinforcement brackets to the frame (each side).
4. If applicable, disconnect the electrical connector from the ACC sensor.
8. Using a body panel pry tool, remove the push pin attaching the shroud to the grille (each side). Remove bumper from the vehicle.
©2023 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
110784A0
Powered by FlippingBook