I N S T A L L A T I O N I N S T R U C T I O N S
10. Using a 24mm socket wrench, remove the factory bolt and nut tabs from the frame rail to remove the factory tow hooks and crash bars. (Fig. 9)
(Figure 9)
11. Remove the factory tow hooks.
12. Unclip the factory wiring harness from the six (6) front sensors and two (2) fog lights.
13. Remove the sensor from the sensor housing by expanding both sides of the sensor housing and lifting up. (Fig. 10-11)
(Figure 10)
8
Powered by FlippingBook