I N S T A L L A T I O N I N S T R U C T I O N S
7. With assistance, support the bumper from both sides of the vehicle. Using an 18mm socket wrench, 24mm socket wrench and 18mm open end wrench, remove the three factory bumper bolts that hold the factory bumper to the frame rail. (Fig. 7)
(Figure 7)
8. **Note: The factory tow hooks stay in the frame rail while extracting the front bumper from the rail ends**
9. Remove the factory bumper from the vehicle and set aside. (Fig. 8)
(Figure 8)
7
Powered by FlippingBook