25. Reinstall the outermost of the bumper cover corner screws (each side).
Figure 21
26. Reinstall the headlight finisher trim pieces beneath the headlight by sliding the locking tab into the slot and then inserting the green pin in appropriate hole.
Repeat for other side.
Figure 22
Green clip
Figure 23
27. If equipped, plug in fog lights and parking sensors (both sides).
Figure 24
For TRD models : First remove stock tow hooks on passenger side before installing winch kit.
28. Place winch inside new semi hidden winch mount (A1). NOTE: Lay winch on its side so it will fit inside vehicle. You flip upright as soon as bumper is on vehicle.
Figure 25
9
102875A0
©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook