IV. Maintenance/Care • Inspect all metal parts on the plow, plow mount, and related hardware. Replace all parts that appears rusted or deformed prior to use. • Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced immediately. • Check all cables prior to use. Replace cables that are worn or frayed. • Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely. WARNING Failure to perform regular inspections and maintenance on the plow, plow mount, and related hardware may result in vehicle damage and operator injury or death.
V. Troubleshooting Problem 1. Difficulty getting the plow clip pins through the plow flanges and plow mount (A1).
Solution
1. Be sure to install the plow on level ground. Position the plow into place. Align one of the plow flanges with the mounting hole in the plow mount (A1). Slide a screwdriver (or similar) through the plow flange and plow mount. Align the plow flange on the other side with the plow mount. Slide one of the clip pins through the plow flange and plow mount. Go back to the first plow flange. Remove the screwdriver and replace it with the clip pin.
WARN® INDUSTRIES
PAGE 6
65071 Rev A1
Powered by FlippingBook