Remove Geartrain (Section 2.2 steps 1-3) 1.
Remove geartrain bolts 2.
Head: 4mm Hex M5 x 0.8 x 60mm Torque: 10.6-13Nm (94-115inlb)
Turn until bolt holes line up in desired clocking position. 3.
Install geartrain bolts 4.
Head: 4mm Hex M5 x 0.8 x 60mm Torque: 10.6-13Nm (94-115inlb)
WARNING: DO NOT SEPARATE! THE O-RING SEAL MAY DISLODGE.
46
Powered by FlippingBook