NEOPRENE WINCH COVERS Keep your WARN winch looking new with these Neoprene winch covers. Made from durable, form- fitting Neoprene, these covers provide protection from flying stones, road debris, and the elements. • Elastic cover stretches over winch and resists flapping— no cords or straps • UV protectant spray included to prolong the life of the winch cover
SOFT WINCH COVERS WARN soft winch covers are made of durable nylon-backed vinyl, and hold securely with elastic bungee cord fasteners.
HARD COVER For XD9i Winch Made from high impact co-laminate. For XD9i winch with a roller fairlead, mounted on the Trans4mer system only PN 34035
PN 15639 Fits the 16.5ti, M15 and M12 winches mounted on the Trans4mer, and Flatbed Mount
PN 81762 Fits all PowerPlant winches PN 81761 Fits 9.5cti and XD9i winches PN 91414 Fits M8, XD9, and 9.5xp PN 91415 Fits all ZEON and ZEON Platinum winches
WARN FRONT RECEIVER Mount your portable winch to the front of your vehicle with the WARN 2” front receiver. Mounts directly on most vehicle frames without drilling. For part numbers, see application guide. WINCH CARRIER Mount your WARN winch to this carrier for a portable winch configuration. Pre-drilled to mount the ZEON 8 and 10, 9.5xp, XD9i, XD9, M8, VR8 and 10 winches. Carrier kit includes Quick Connect wiring for front of vehicle (winch and rear wiring sold separately). PN 89990 ZEON winch carrier and wiring for front of vehicle. ZEON winch sold separately. PN 26370 Winch carrier and wiring for front of vehicle. Winch sold separately. Note: to mount the 9.5cti you must purchase as a complete kit. PN 75330 Multi-Mount Winch Carrier for PowerPlant 9.5. PowerPlant sold separately. Includes wiring for front of vehicle. QUICK CONNECT POWER ACCESSORIES A. Dust Cover (for Quick Connect plug) PN 69847 B. Quick Connect and 71cm (28”) power lead. Connects to winch PN 36080 C. Quick Connect plugs only, no power lead PN 22680 D. Quick Connect and 2.3m (7.5’) power lead, for front mounting of portable winch PN 26405 E. Quick Connect booster cable kit PN 26769 MULTI-MOUNT WINCH MOUNTING SYSTEM Portable Configuration For Winching From The Front Or Rear For those looking for added versatility with their winch, the WARN Multi-Mount system allows you to have a winch on the front or rear of the vehicle for maximum flexibility. Simply add the receiver to the front of the vehicle, and the Quick Connect wiring to the rear, and you’re ready to go.
PN 8557 Fits the M8274-50 winch
Solenoid Bracket PN 26368
PN 13917 Fits 9.5cti, 9.5ti, XD9i, and winches mounted on the Trans4mer, Multi-Mount and Flatbed Mount Fits 9.5xp, XD9, M8, (with control pack mounted behind winch motor), mounted on the Trans4mer, Multi-Mount and Flatbed Mount
PN 13916 For the 9.5xp, XD9, and M8 winches, mounted the Trans4mer
Hitch cover (black rubber) PN 37509
Hitch pin PN 63063
Front Receiver
Winch Carrier
A
C
B
QUICK CONNECTOR WIRING KITS FOR REAR OF VEHICLE 6.1m (20’) connection for rear of vehicle. Includes Power Interrupt kit and dust cover PN 32963 7.3m (24’) connection for rear of vehicle. Includes Power Interrupt kit and dust cover PN 32966
PN 13918 Fits 9.5xp, XD9, and M8 winches mounted on the Classic Bumper (when winch control pack is mounted behind the motor)
PN 18250 Fits 9.5ti and XD9i mounted on the Classic Bumper
Wiring kit for rear of vehicle
E
D
56 ACCESSORIES
ACCESSORIES 57
Powered by FlippingBook