INSTALLATION INSTRUCTIONS
23. Secure the upper tab of the wiring mount bracket using the stock bolt just removed.
Winch Cables
A6
A7
Extenstion Cables
Bolt
28. Tidy up all wires using the remaining cable ties to ensure they are out of the way from all moving objects. NOTE: If using a remote plug extension kit, install it into the bracket flange with the remote plug cutout. 29. Install the red jumper cable (A2) ring terminal over the battery positive post, followed by the OEM power cable and fully tighten.
24. Secure the lower bracket tab to the vehicle with one M6 bolt (B1).
A7
B1
Jumper cable
Post
NOTE: Land Cruisers will use the supplied M6 bolt (B1) and nut (B2) to secure the upper tab on bracket.
B1 & B2
A7
30. Reinstall the OEM ground to the battery. 31. With the battery and wiring extensions fully connected, reinstall the interior trim pieces in the reverse order in which they were removed. 32. Reinstall the seat belts using the original hardware and cover trims.
25. Locate the two junction boxes (A6). 26. Install the winch power and ground cables to your extension power and ground cables using the junction boxes. 27. Secure the junction boxes onto the bracket, using cable ties.
©2025 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
112312A0
Powered by FlippingBook