IV. INSTALLATION
1. Place one u-bolt (B2) over frame in between frame and plastic skid plate.
Note: There is a plastic tab on the skid plate; the u-bolt (B1) will go in between the tab and frame.
B1
Skid Plate
Figure 1
Plow Mount
2. Assemble plow mount (A1) to u-bolt (B1) installed in step 1 with two 5/16” flat washers (B3) and two 5/16-18 lock nuts (B4). Do not tighten at this time.
3. Place remaining u-bolts ( B2) around the vehicle frame and through plow mounting plate (A1). Attach plow mounting plate with remaining 5/16 flat washers (B3) and 5/16-18 lock nuts (B4). See Figure 3.
Figure 2
4. Align the plow mount with the vehicle and tighten the u-bolts uniformly to 10lb-ft (14 N- m).
Figure 3
WARN INDUSTRIES
PAGE 4
70969A1
Powered by FlippingBook