CAUT I ON
MOVING PARTS ENTANGLEMENT HAZARD Failure to observe these instructions could lead to minor or moderate injury
•
Part edges may be sharp!
• Always use proper posture / lifting technique or get lifting assistance while handling and installing product.
Read installation and operating instructions thoroughly.
EQUIPMENT DAMAGE NOT I C E
•
Never tow vehicle by attaching a tow bar to the eyelets on the bumper.
• Do not attach tow bars directly to the bumper. Damage to bumper may occur. WARN bumpers are not designed to be used for flat towing. Consult with the manufacturer of your tow bar system for the proper vehicle tow bar brackets. Read installation and operating instructions thoroughly.
BEFORE YOU BEGIN
This product may interfere with driver assist systems such as adaptive cruise control and parking assist systems that have sensors or cameras installed in the bumpers or front grill area. If your vehicle is equipped with any of these systems or features, consult your vehicle owner’s manual before installing this product. These systems may need to be disabled as a result of installing this product.
TOOLS REQUIRED
• PANEL PRY TOOL • TAPE MEASURE • SILVER MARKER
• 11MM SOCKET WRENCH • 15MM SOCKET WRENCH • 18MM SOCKET WRENCH • 7/16” SOCKET WRENCH • 7/16” COMBINATION WRENCH • 3/4” COMBINATION WRENCH • 3/4” DEEP SOCKET WRENCH
• DRILL
• 5/16” DRILL BIT • E6 TORX SOCKET
• 1/8” ALLEN WRENCH • 8MM SOCKET WRENCH
TORQUE SPECIFICATIONS
Please use the recommended torque specifications when assembling this product unless otherwise specified in the instructions. FASTENER SIZE FASTENER TORQUE FASTENER SIZE FASTENER TORQUE lb-ft (N.m) lb-ft (N.m) 1/4" 8 (11) M4 (2) 3 5/16" 17 (23) M5 (4.5) 6 3/8" 30 (40) M6 (7.5) 10 7/16” 48 (66) M8 (18) 25 1/2" 74 (100) M10 (37) 50 9/16” 106 (144) 5/8" 148 (200) 3/4” 269 (364)
©2023 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
2
110784A0
Powered by FlippingBook