I N S T A L L A T I O N I N S T R U C T I O N S
10. With the grill gone you can access the bumper mounting bolts on the top deck. Use a 15mm socket wrench to remove the two (2) bolts one of the top and one on the bottom. The bumper can now be removed from the truck. (Figure 10-11)
Figure 10
Figure 11
11. As you remove the bumper, unplug the sensor, heater plug, and lower louver harnesses located on the driver side of the truck. (Figure 12)
Figure 12
12. If equipped, remove the factory tow hooks by using an 18mm socket wrench to unfasten the two (2) bolts in the frame. (Figure 13)
Figure 13
8
Powered by FlippingBook