I N S T A L L A T I O N I N S T R U C T I O N S
20. Using the provided four (4) bolt stacks of ¼”-20 yellow zinc hex bolt, flat washers, lock washer, and hex nut, loosely install the factory louver system with a ½” socket wrench. (Figure 21) (50250-HW)
Figure 21
21. Reverse the process in step 16 to install the heater plug into the driver side mounting bracket. Reconnect the heater plug wiring harness before mounting the bumper. (Figure 22)
Figure 22
12
Powered by FlippingBook