INSTALLATION INSTRUCTIONS
BRP COMMANDER Mounting Kit Installation
1. Prepare the UTV by disconnecting the negative and positive leads to the battery: disconnect the negative battery lead first.
Remove
2. If equipped, remove the plastic side panels from both sides of the vehicle. See Figure 1.
Figure 1
3. If equipped, remove the front bumper brush guard. See Figure 2.
4. Remove the plastic bumper fascia.
Remove
Figure 2
5. If vehicle is equipped with a factory winch, remove fairlead, winch and winch mounting bracket.
6. Place support brackets (2A) inside the frame of the UTV. Align the holes in the support brackets with the holes in the UTV frame as shown in figures 3 and 4.
Figure 3
4
85689A2
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook