Figure 3, YJ and TJ VEHICLES, PASSENGER’S SIDE SHOWN, DRIVER’S SIDE OPPOSITE, TJ FRAME STIFFENING BRACKETS SHOWN, YJ HAS SAME SPACERS AND HARDWARE, BUT WITH DIFFERENT FRAME STIFFENING BRACKET. 5. Install the tire carrier to bumper. This must be done before tightening of the eight frame bolts. If installing on TJ model , remove the plastic license plate mount from the vehicle, it will be trimmed slightly in the bottom corner later. If installing on TJ and YJ models , it is necessary to remove all of the factory rubber tailgate bumpers except the upper one on the driver’s side. Place the nylon washer over the post in the bumper and slide it all the way down. Place the round tube end of the tire carrier on the post sticking up out of the passenger’s side of the bumper and slide it all the way down. See Figure 4 .
Page 4
63398 D2
Powered by FlippingBook