21.On TJ models, using the two supplied brackets, mount the brackets to the body with the factory screws. The end of the bracket with the standard hole is mounted to the body. The slotted holes are used for mounting the license plate. Align the two brackets so they are rotated up 5 degrees and going away from the tailgate. Tighten the factory screws. Using the ¼” hardware provided, insert a bolt with flat washer through the license plate and the bracket and finger tighten with a lock washer and nut. Repeat this for both brackets. See figure 9.
FIGURE 9, MOUNTING BRACKETS FOR LICENSE ON TJ MODELS ONLY
22.On TJ and YJ vehicles with a 3 rd brake light, it will be necessary to re-install the light. This can be easily done by cutting the Original Bracket and mounting it to the vertical post on the new tire carrier. Two small screws are supplied for mounting it. See Figure 10 .
Page 11
63398 D2
Powered by FlippingBook