INSTALLATION INSTRUCTIONS
1. Using a 10mm socket, remove grille by removing the four front center screws, as well as the two outer push pins.
Plastic clips
10mm bolts
Figure 1
2. Remove one plastic clip from fender liner (both sides).
Plastic clip
Figure 2
3. Using a 17mm socket, remove the two bolts securing the tow hook (each side). Remove tow hook and set aside. Save tow hook and bolts for reuse.
Figure 3
4
105714A0
©2017 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
Powered by FlippingBook