Replacement Wire Rope Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other.
REPLACEMENT ROPES:
REMOVABLE ROPE ABRASION SLEEVE When winching in abrasive environments, the Rope Abrasion Sleeve can help protect your rope from trail hazards that can damage rope. This can extend the life of your synthetic rope and keeps you on the trail. •Helps to protect synthetic rope against abrasion •Reflective printing for increased visibility
ROPE PART NUMBERS SYNTHETIC
SPYDURA PRO
WINCH MODEL
WINCH PN
LENGTH
DIAMETER
WIRE STANDARD DUTY SPYDURA
9.5xp
68500 87310 97550 85760 97600 71550 68801 97740 73010 106170
100’ (30.4m) 100’ (30.4m) 125’ (38.1m) 125’ (38.1m) 100’ (30.4m) 50’ (15.2m) 90’ (27.4m) 80’ (24.4m)
5/16” (7.9mm) 38314
9.5xp-s
3/8” (9.5mm)
87915
9.5cti
5/16” (7.9mm) 38312 5/16” (7.9mm) 38312
9.5cti Multi-Mount
9.5cti-s
3/8” (9.5mm) 3/8” (9.5mm)
87915 71717
Wire terminal
9.0Rc 16.5.ti
7/16” (11.1mm) 61950
• Made from double-layered durable ballistic nylon • Hook-and-loop enclosure secures sleeve over rope • Limited 1 year warranty 100330 L
16.5ti-s
3/8” (9.5mm)
93120
Endurance 12.0
80’ (24m)
3/8” (9.5mm) 74313 3/8” (9.5mm) 106141
Swaged loop
M8274
125’ (38.1m) 125’ (38.1m)
M8274-S
106175 - S
3/8” (9.5mm)
102343
38631 - 12V 375832 - 24V 150’ (45.7m)
M8274-50
5/16” (7.9mm) 38311 5/16” (7.9mm) 38314
M8
26502 87800
100’ (30.4m) 100’ (30.4m)
M8-s
3/8” (9.5mm)
87915
Wire Rope Extension Galvanized aircraft wire rope with loop on both ends allows you to extend the reach of your winch.
17801 - 12V 265072 - 24V 125’ (38m)
M12
3/8” (9.5mm) 38423
M12-S
97720
100’ (30.4m)
3/8” (9.5mm)
87915
47801 - 12V 478022 - 24V 90’ (27m)
M15
7/16” (11mm) 3/8” (9.5mm)
61950
M15-S
97730 91800 91801 103250 103251 103252 103253 103254 103255 96800 96805 96810 96815 96820 97035 28500 27550 37441 88980 90260 89305 90330
80’ (24.4m) 125’ (38.1m) 80’ (24.3m) 94’ (28.6m) 90’ (27.4m) 80’ (24.4m) 90’ (27.4m) 80’ (24.4m) 90’ (27.4m) 94’ (28.6m) 90’ (27.4m) 80’ (24.4m) 90’ (27.4m) 80’ (24.4m) 90’ (27.4m) 100’ (30.4m) 125’ (38.1m) 125’ (38.1m) 100’ (30.4m) 100’ (30.4m) 100’ (30.4m) 100’ (30.4m)
93120
5/16” x 50’ (7.9mm x 15.2m) 25430 3/8” x 75’ (9.5mm x 22.9m) 25431
PowerPlant 9.5 PowerPlant 12
5/16” (7.9mm) 38312
3/8” (9.5mm)
74313
VR EVO 8
5/16” (7.9mm) 38314
VR EVO 8-S VR EVO 10 VR EVO 10-S
3/8” (9.5mm)
104232
Swaged loop on both ends
3/8” (9.5mm) 74313
3/8” (9.5mm)
104232
VR EVO 12
3/8” (9.5mm) 74313
VR EVO 12-S
3/8” (9.5mm)
104232
VR8
5/16” (7.9mm) 38314
VR8-S
3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm)
87915
Winching Gloves These gloves are designed to help protect your hands from the sharp barbs and abrasion that may occur when handling winch rope. Mandatory equipment when working with winch rope. •Durable synthetic leather with Kevlar reinforcement resists abrasion •Extra reinforcements provide superior knuckle and fingertip protection •Shock absorbing palm •Terry cloth sweat wipe, neoprene wrist and pull strap, ID tag Size L 91650
VR10
89213
VR10-S
87915
VR12
89213
VR12-S
87915
XD9000 XD9000i
5/16” (7.9mm) 38314 5/16” (7.9mm) 38312 5/16” (7.9mm) 38312 5/16” (7.9mm) 89212 5/16” (7.9mm) 89212
WARN WINCH DAMPER The WARN Winch Damper helps to prevent rope recoil in the event of a rope failure. While rope failure does not happen often, this damper will help the rope fall to the ground if such an event were to occur. Made from durable vinyl, the
XD9000i Portable
ZEON 8
ZEON 8 Multi-Mount
ZEON 8-S
3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm) 3/8” (9.5mm)
87915 87915
ZEON 8-S Multi-Mount
WARN Winch Damper also features a pocket for rigging accessories, a rubber-coated center section to prevent it from sliding down the line, and a reflective strip for increased visibility. The product also complies with
88990 - 12V 90665 - 24V 80’ (24.4m)
ZEON 10
89213 89213
ZEON 10 Multi-Mount
90340 89611 90360
80’ (24.4m) 100’ (30.4m) 100’ (30.4m)
ZEON 10-S
87915 87915
Size XL 88895 Size XXL 91600
4WD competition damper regulations. •Rubber-coated center section guards against sliding •Durable vinyl construction •Pocket for accessory storage •Reflective strip for increased visibility •Complies with 4WD competition damper requirements 91575
ZEON 10-S Multi-Mount
89120 - 12V 90666 - 24V 80’ (24.4m)
ZEON 12
89213
ZEON 12-S
95950 92810 92815 92820 95960
80’ (24.4m) 80’ (24.4m) 100’ (30.4m) 80’ (24.4m) 80’ (24.4m)
93120
ZEON Platinum 10 ZEON Platinum 10-S ZEON Platinum 12 ZEON Platinum 12-S
89213
87915
89213
93120
96 ACCESSORIES
ACCESSORIES 97
Powered by FlippingBook