EXTREME DUTY KINETIC ENERGY ROPE FOR INDUSTRIAL AND HEAVY-DUTY APPLICATIONS Stretches up to 30 percent of its total length, for easy extraction from sand, mud, and snow Flexible, durable, weather-resistant polymeric coating for extreme durability, and rubberized rope eyes for maximum durability at the wear points of the rope.
Each Factor 55 Rope, Strap, and Soft Shackle includes an informative specification label that is;
• Designed to help you understand the proper load limits for each piece of equipment • Individually serialized for material lot traceability
7/8” DIAMETER KINETIC RECOVERY ROPE Designed for Jeeps and mid-sized trucks and SUVs • Size: 7/8” diameter x 30’ length • Minimum breaking strength 28,300 lbs.
5/8” DIAMETER KINETIC RECOVERY ROPE Designed for UTV/ATV/ Powersports • Size: 5/8” diameter x 20’ length • Minimum breaking strength 14,800 lbs.
1” DIAMETER KINETIC RECOVERY ROPE Designed for full-sized trucks and SUVs • Size: 1” diameter x 30’ length • Minimum breaking strength 33,500 lbs. • Working load limit: 6,700 lbs. 00559 1IN DIA X 30 FT
2.5” DIAMETER KINETIC RECOVERY ROPE Designed for use in mining, agriculture, and military applications • Size: 2-1/2” diameter x 30’ length • Minimum breaking strength 201,000 lbs. • Working load limit: 40,200 lbs. 00562 2-1/2 DIA X 30FT
2” DIAMETER KINETIC RECOVERY ROPE Designed for use on semis, large utility or dump trucks and tractors. • Size: 2” diameter x 30’ length • Minimum breaking strength 131,500 lbs. • Working load limit: 26,300 lbs. 00561 2IN DIA X 30 FT
1.5” DIAMETER KINETIC RECOVERY ROPE Designed for HD trucks, vans, and RVs • Size: 1-1/2” diameter x 30’ length • Minimum breaking strength 74,000 lbs. • Working load limit: 14,800 lbs. 00560 1-1/2 DIA X 30 FT
• Working load limit: 2,960 lbs. 00563 5/8IN DIA X 20FT
• Working load limit: 5,660 lbs. 00068 7/8IN DIA X 30FT
MADE IN USA
KINETIC ROPE BRIDLE • Rigging that allows you to utilize two recovery points on your vehicle during a kinetic recovery • Dual connection points reduces the stress on the individual attachment points
KINETIC ENERGY ROPE SIZING GUIDE, ROPE DIAMETER LISTED
SIZE YOUR KINETIC RECOVERY ROPE TO YOUR VEHICLE Purchase your Factor 55 KERR based on your vehicle’s gross vehicular weight rating (GVWR). A properly sized rope for typical SUVs and trucks is one that has a 4:1 to 6:1 minimum breaking strength to GVWR ratio. For larger vehicles (Unimogs, EarthRoamers, Earth Cruisers, heavier military trucks, etc.), a 2:1 to 4:1 ratio may be acceptable. If you use a smaller and lighter KERR, rope breakage might occur. If too large and heavy, the rope won’t stretch enough, reducing the maximum kinetic energy assist. The KERR must be suited to the GVWR of the lighter of the two vehicles used in the recovery process.
7/8” DIAMETER X 10’ LENGTH • Minimum breaking strength 28,300 lbs.
1” DIAMETER X 10’ LENGTH • Minimum breaking strength 33,500 lbs. • Working load limit 6,700 lbs. 00073 BRIDLE - 1” X 10’
• Working load limit 5,660 lbs. 00072 BRIDLE - 7/8”” X 10’
PAGE 20
PAGE 21
Powered by FlippingBook