SOFT SHACKLES A lightweight replacement connecting rigging for common steel screw pin shackles. Factor 55 Soft Shackles are Made in the USA under uncompromising quality standards. They have been lab- and field-tested to ensure consistent repeatable minimum breaking strength values.
• UHMWPE construction, similar to synthetic winch lines • Lightweight, strong rigging that can be used in place of steel screw-pin shackles • Easily fits standard shackle mount products • Each individual soft shackle is serialized for manufacturing date and material lot traceability. WLL and minimum breaking strengths are clearly marked. • Engineered, tested, and made in the USA
MADE IN USA
STANDARD DUTY SOFT SHACKLES
EXTREME DUTY SOFT SHACKLES • Constructed of HMPE Plasma rope with extra abrasion and UV protection • Woven polyester jacket that is carefully whipped and coated with Fiber Lock • The protective jacket is attached close to the knot to provide as much abrasion protection as possible • Additional 25-30% verified breaking strengths when compared to standard soft shackles on the market today
5/8” INDUSTRIAL EXTREME DUTY SOFT SHACKLE • Size: 5/8” diameter x 18” length • Minimum breaking strength 102,500 lbs. • Working load limit 20,500 lbs. 00570 EXTREME DUTY SOFT SHACKLE 5/8IN 7/8” INDUSTRIAL EXTREME DUTY SOFT SHACKLE • Size: 7/8” diameter x 24” length • Minimum breaking strength 185,000 lbs. • Working load limit 37,000 lbs. 00571 EXTREME DUTY SOFT SHACKLE 7/8IN 1-1/8” INDUSTRIAL EXTREME DUTY SOFT SHACKLE • Size: 1-1/8” diameter x 24” length • Minimum breaking strength 294,000 lbs. • Working load limit 58,000 lbs. 00572 EXTREME DUTY SOFT SHACKLE 1-1/8IN 3/8” EXTREME DUTY SOFT SHACKLE • Size: 3/8” diameter x 10” length • Minimum breaking strength 43,500 lbs. • Working load limit 8,700 lbs. 00066 EXTREME DUTY SOFT SHACKLE 3/8IN 3/8” EXTREME DUTY SOFT SHACKLE • Size: 3/8” diameter x 20” length • Minimum breaking strength 43,500 lbs. (exceeds 70,000 double looped) • Working load limit 8,700 lbs. (exceeds 14,000 double looped) 00067 EXTREME DUTY SOFT SHACKLE 3/8IN
1/2” STANDARD DUTY SOFT SHACKLE • UHMWPE 12-strand construction, similar to synthetic winch line • ½” diameter, 10” length • Minimum breaking strength 60,000 lbs. • Working load limit 12,000 lbs. • Weight: 7 oz 00585 STANDARD DUTY SOFT SHACKLE 1/2IN X 10IN
STEEL SHACKLES The recreational offroad industry is full of low-quality imported shackles due to their low cost. This limits the locations to purchase USA-made shackles to only your local rigging supply store. Factor 55 has partnered with the Crosby Group to offer its quality shackles. These shackles can sometimes have small blemishes after their powder coating. These blemishes do not affect the shackle’s ability to outperform low-quality imported shackles in any way. • Available in a variety of sizes and three finishes • Forged construction for maximum durability
7/16” STANDARD DUTY SOFT SHACKLE • UHMWPE 12-strand construction, similar to synthetic winch line • 7/16” diameter, 10” length • Minimum breaking strength 39,000 lbs. • Working load limit 7,800 lbs. • Weight: 6.3 oz 00069 STANDARD DUTY SOFT SHACKLE 7/16IN X 10IN
3/4” CROSBY SHACKLE • Most common for truck, Jeep, SUV applications • 7/8” diameter pin
7/8” CROSBY SHACKLE • Most common for large truck, industrial/commercial applications • 1” diameter pin • Working load limit 6½T (13,000 lbs.) • Minimum breaking strength 78,000 lbs. • Galvanized finish only 00465 CROSBY 7/8 SHACKLE – GALVANIZED
• Working load limit 4¾T (9,500 lbs.) • Minimum breaking strength 57,000 lbs. • Black or high-viz red powder-coated finish 00064-01 3/4 SHACKLE – RED 00064-04 3/4 SHACKLE – BLACK
ULTRAGUARD Protective sleeve for soft shackles and synthetic rope
• Sturdy construction from woven UHMWPE and polyamide • Fits over soft shackles and winch lines up 1/2”(will fit over soft loops) • Can be used with Factor 55 Rope Retention Pulley (RRP) • Engineered, tested, and Made in USA • Ultra cut- and abrasion-resistant 00125 ULTRAGUARD PROTECTIVE SLEEVE
PAGE 16
PAGE 17
Powered by FlippingBook