LOAD DISTRIBUTION PLATE • Rigging plate designed for the distribution of multiple loads and directions • Collection point for multiple winching applications • Symmetrical shape allows for common bridle tow configurations • Self-aligning shackle pin holes fit common ¾” shackles, pear shaped holes permit ¾” and 7/8” shackles bodies to pass through • Precision machined from 6000 series military-grade aluminum, Mil-A-8625 F Type III Gray finish for exceptional durability
MADE IN USA
STANDARD DUTY TOW STRAPS • Made from 100% low-stretch polyester • 2-inch width and 30’ length with double-ply construction and stitched the length of the strap allows for 31,000 lb. breaking strength • Reinforced eyes with durable Cordura sleeve. Can also be used for a 30’ winch extension. • Individually serialized and properly labeled for different load configurations • Straight Line MTS: 31,000 lbs • Straight Line working load limit : 6,200 lbs • Made in USA 00074 STANDARD TWO STRAP (30’ X 2”)
• Laser-engraved angle scale for sling multiplier estimates • Large, smooth corner radii for soft shackle applications • Working load limit 20,000 lbs. • Minimum breaking strength 442,000 lbs. 00470-06 LOAD DISTRIBUTION PLATE – GRAY
TREE SAVER STRAP • Serves as a versatile link to attach to trees or vehicles • 8’ x 3” size; 4’ length when used in basket configuration • Flat shape prevents rolling and twisting • Durable Cordura abrasion guard for reinforced eyes and webbing seams • Working Load Limits clearly labeled for straight, basket and choker configurations • Straight Line MTS: 46,500 lbs • Straight Line working load limit 9,300 lbs • Made in the USA 00077 TREE SAVER STRAP (8FT X 3IN)
EXTREME DUTY TOW STRAPS
• All the benefits of Standard Straps, but more durable • Entire strap is wrapped in abrasion- resistant Cordura for an extreme level of protection and durability. • Straight Line MTS: 31,000 lbs • Straight line working load limit 6,200 lbs • Made in USA 00075 EXTREME DUTY TOW STRAP (30’ X 2”)
SHORTY STRAP II & III • Ultra-short straps can be used in a variety of recovery applications • Applications vary from attaching to vehicles without recovery points to using a winch and Shorty Strap to field repair/straighten bent steering components like tie rods and drag links • Shorty Strap II is 2” wide x 3’ long. Shorty Strap III is 3” wide and 3’ long. Both can be reduced to 1.5’ when used in a basket configuration • Flat shape prevents them from rolling and twisting when attached to tubular shapes like bumper stingers, steering components, and nerf bars
• Low stretch/energy storage means less recoil energy during a possible component failure • Durable Cordura abrasion guard for reinforced eyes and webbing seams • Working Load Limits clearly labeled for straight, basket and choker configurations • Shorty Strap II straight line MTS: 31,000 lbs, working load limit 6,200 lbs • Shorty Strap III straight line MTS: 46,500 lbs, working load limit 9,300 lbs • Made in the USA
STRAP WRAPS • Use these versatile wraps to secure gear. • Durable hook and loop closure and a heavy-duty powder-coated steel ring offer a perfect way to store ropes, straps, and gear. • Secondary loop section on the outer webbing allows the Strap Wraps to be secured at diameters 2.5” and smaller, but can go around items 8” in diameter. Can be combined for larger items • 2 strap wraps per package
00078 SHORTY STRAP II (3FT X 2IN) 00079 SHORTY STRAP III (3FT X 3IN)
• 20” x 1” size • Made in USA 00071-2 STRAP WRAPS (PKG OF 2)
PAGE 18
PAGE 19
Powered by FlippingBook