SERVICE INSTRUCTIONS
Tabor 10000 WINCH
Should you encounter a problem during installation or operation of your winch, please follow these steps toward resolving the problem: 1. Refer to your operator’s guide and installation instructions. It has illustrations and detailed information on the installation and safe and proper operation of your winch. It also includes a replacement parts list and assembly diagrams. If you are unable to resolve the problem, then go to step 2. 2. Contact your dealer where you purchased your winch. If, after discussing the problem with their parts and service staff, you are still unable to resolve the problem then go to step 3. 3. Call an Authorized WARN Service center from the list provided on the back of the warranty sheet included with the product. When calling, please have the following information available: winch model number and purchase date, make, model and year of vehicle. 4. If you are unable to resolve the problem to your satisfaction, please call Warn Industries Customer Service at: 1-800-543-9276. When calling, please have the following information available: winch model number and purchase date, make, model and year of vehicle. You may also contact Warn Industries by visiting our website: www.warn.com
Part Number: 88395 Rated Line Pull: 10000 lbs. (4536 kgs) Motor: 12V DC, Series Wound Controls: Remote switch, 12” (3.7m) Lead Gear train: 3-Stage Planetary Gear Ratio: 261:1
Clutch (Freespool): Sliding Ring Gear Brake: Automatic Direct Drive Cone Drum diameter/length : 2.5”/9.0” (6.4cm/23cm) Kit Shipping Weight: 89 lbs. (40.4 kgs) Rope: Wire Rope, Ø 3/8” x 80’ (Ø 10mm x 29m) Fairlead: Roller Recommended Battery: 650CCA Minimum for winching Duty Cycle: Intermittent Battery leads: 2 gauge, 72” (1.83m)
Finish: Black Powder Coat Warranty: Limited Lifetime Mounting Bolt Pattern: 10.0” x 4.5” (254mm x 114.3mm) Winch Dimensions: 20.80” L x 6.3” D x 6.97” H (528mm L x 160mm D x 177mm H)
SERVICE/UPGRADE KITS
KIT #
PN
ITEM
QTY
DESCRIPTION
KIT 1 92083
END HOUSING KIT END HOUSING CLUTCH LEVER SEAL, O-RING RING GEAR, SLIDING CAPSCREW, 10-24
1 2 3 4 5 6 7 8
1 1 1 1 1 1 1
CLUTCH LEVER DETENT SCREW
10
GASKET
THRUST WASHER
KIT 2 92077
DRUM SUPPORT KIT
21 22 23
1 1 2
GEAR SIDE DRUM SUPPORT MOTOR SIDE DRUM SUPPORT
BUSHING
KIT 3 86473
TIE ROD KIT
24 25
2 4
TIE ROD
5/16" BOLTS
WARN Industries, Inc.
88397A2
WARN Industries, Inc.
88397A2
KIT #
PN
ITEM
QTY
DESCRIPTION
KIT 4 92079
RING GEAR KIT
7
1 1 1 1 1 1 1 1 1 1 1 1
GASKET
13 14 33
CARRIER ASSEMBLY, STAGE 3
RING GEAR
SPLINED DRIVE GEAR
KIT 5 92085
CARRIER KIT SUN GEAR
10 11 12 32 30 31 32 33
CARRIER ASSEMBLY, STAGE 1 CARRIER ASSEMBLY, STAGE 2
SHAFT, DRIVE
KIT 6 32455
BRAKE KIT COUPLER
BRAKE
SHAFT, DRIVE
SPLINED DRIVE GEAR
KIT 7 900548
MOTOR KIT
40 45 54
1 1 1
MOTOR SPACER
GROUND BOLT
KIT 8 92073
CONTROL PACK KIT CONTROL PACK
60 62 65
1 1 1
SOLENOID BRACKET
KIT 9 92067
BOLT AND GASKET KIT CAPSCREW, 10-24
6 7 8
10
2 1 2 4 1 1
GASKET
THRUST WASHER BUSHING 5/16" BOLTS GROUND BOLT PARTS PACK
23 25 54 55
KIT 10 92066
LABEL KIT
INDIVIDUAL ITEMS 26107
26 27 28 53 65 68 80
DRUM ASSEMBLY WIRE ROPE ASSEMBLY
86515 79626 15901 90172 38626 5742
TERMINAL KIT GROUND CABLE
BRACKET
REMOTE ASSEMBLY FAIRLEAD, ROLLER
WARN Industries, Inc.
88397A2
WARN Industries, Inc.
88397A2
Page 1 Page 2Powered by FlippingBook