KNOW YOUR ADVANCED WIRELESS REMOTE
MOUNTING
Before you begin, you should familiarize yourself with your WARN® Advanced Wireless Remote Control and each of its functions.
Step 1 - Mount the Winch Winch mounting kits are available to satisfy nearly all applications. For information on available kits, contact your WARN® product dealer. NOTICE For optimal performance and the results you expect, WARN® mounting plates are strongly recommended. CAUTION To prevent accidental activation of the winch and serious injury, complete the winch installation and attach the hook before installing the wiring. WARNING Always choose a mounting location that is sufficiently strong enough to withstand the maximum pulling capacity of your winch.
Mounting Orientation and Hardware Feet down mounting: • ( 4 ) M10 -1.5 øanged hex locknut • ( 4 ) M10-1.5 x 35 hex øange, 8.8, bolt • ( 2 ) 7/16-14 x 1 hex bolt
USB Charging Port
(4) M10-1.5 øanged hex locknut
LCD
Left Button
Right Button
WARNING Never use bolts that are too long.
WARNING Always spool the winch rope onto the drum in the direction speciöed by the drum rotation labels on the winch and/or in the documentation. This is required for the automatic brake (if so equipped) to function properly. WARNING Always wind the winch rope on the bottom (mount side) of the drum. This winch should always be mounted in a horizontal orientation with the rope winding on and off the drum on the mount side (bottom) of the drum. Correct rotation is required for the automatic brake to function properly. Horizontal mounting helps prevent the rope from piling up on one end of the drum which can damage the winch. Always use recommended bolt and washer combinations torqued to recommended levels. Specifications listed below. Mounting system will dictate bolt length.
Select Button
Winch Power-out Button
Winch Power-in Button
Reset Button
(2) 7/16-14 x 1 hex bolt
(4) M10-1.5 x 35 øanged hex bolt
For feet forward mounting: • ( 4 ) M10x1.5 øanged locknut 15mm hex • ( 4 ) M10-1.5 x 35 hex øange, 8.8, bolt • ( 2 ) M10-1.5 x 40 hex øange, 8.8, bolt (found in separate plastic bag)
Advanced Wireless Remote Control:
The Advanced Wireless Remote Control allows the operator to control the winch and two auxiliaries. Display of function menus, important vehicle feedback and winch functions.
LCD:
(4) M10-1.5 øanged hex locknut
Mounting Bolt Pattern: Standard: 10”x 4.5” (54 mm x 114.3 mm) Smooth and øat mounting surface, minimum thickness = 1/4” (6.4 mm)
Select Button:
Press to confirm/activate selections.
(2) M10-1.5 x 35
Left Button:
Press to navigate left through each menu display.
Right Button:
Press to navigate right through each menu display.
Winch Power-out Button:
Press to control the power-out operation of the winch.
Winch Power-in Button:
Press to control the power-in operation of the winch.
Reset Button :
The reset button is used to restart your remote in rare cases when it functions incorrectly. Resetting the remote will preserve your settings.
USB Charging Port:
Used to charge the internal battery.
Helpful Hint: Connect your remote
USB Cable (not shown) :
Used to connect Advanced Wireless Remote Control to chargers or your computer to charge.
to a charging device now. This will allow your remote to charge while you are installing your winch. Refer to page 13 for charging steps.
Car Charger Adapter (not shown) :
(2) M10-1.5 x 40 (found in separate bag)
Car charger allows plugging into car’s DC socket to keep your Advanced Wireless Remote Control powered when you are on the go.
WARN INDUSTRIES 11
WARN INDUSTRIES 12
Powered by FlippingBook