FIRST TIME OPERATING INSTRUCTIONS
FIRST TIME OPERATING INSTRUCTIONS
Pairing the Remote Control WARNING Never pair more than one winch and one remote at a time. Your Advanced Wireless Remote Control will arrive already paired to your WARN® ZEON® Platinum winch system, however, replacement remotes will need to be paired. 1. To pair the remote to a winch, navigate to the Pairing Icon and press Select.
4. After selecting the green check mark icon, a timer will begin counting down from 30 seconds.
8. If pairing was unsuccessful, repeat steps 1-5. 9. To close the pairing panel, press Select.
Thermal Protection Setting Your Advanced Wireless Remote has a thermal protection setting, giving you the option to have the winch shut off automatically when it reaches a high temperature protection point. 1. To activate the thermal protection setting, navigate to the thermal Icon and press Select.
Thermal protection Icon
Pairing Icon
5. During this time, turn the Wireless Control Activation Switch on the back of the control pack to OFF and then ON again.
Wireless Control Activation Switch
Select
2. Press and hold select and the right button simultaneously for 3 seconds to bring up the pairing confirmation menu.
Select
2. The thermal protection system defaults as deactivated.
6. If pairing is successful, a green check mark will appear.
Thermal protection deactivated
Right Button
Select
3. To activate the thermal protection setting, use the left or right button to highlight the thermal protection shut-off option. A check mark will appear in the box. Press select to confirm selection.
3. To continue pairing, select the green check mark icon by navigating with the left or right buttons and press Select.
7. If pairing was unsuccessful, the red X mark will remain, and the remote will remain unpaired.
Thermal protection activated
Select
WARN INDUSTRIES 21
WARN INDUSTRIES 22
Powered by FlippingBook