W IRING
R EMOTE C ONTROL
• Never engage or disengage clutch if winch is under load, winch rope is in tension or drum is moving. • Never leave winch remote control where it can be activated during free spooling, rigging, or when the winch is not being used. • Never leave the wireless winch remote control turned on when installing, freespooling, rigging or servicing winch, or when the winch is not being used. • Always store the remote control in a protected, clean, dry area. WARNING
WARNING
• Always remove jewelry and wear eye protection when making battery connections. • Never route electrical cables across sharp edges. • Never route electrical cables near parts that get hot. • Never route electrical cables over battery terminals. • Never route electrical cables through or near moving parts. • Always insulate and protect all exposed wiring and electrical terminals. • Always place the supplied terminal boots on wires and terminals.
Wireless Activation AND Deactivation Button: Press and hold to activate wireless mode. Press and hold to deactivate wireless mode.
F1
Wired Activation Light: Red light on when wired mode is activated.
Wireless Activation Light: Blue light is ON when wireless mode is ACTIVATED. Blue light is OFF when DEACTIVATED.
Winch Power-in Button: Press to control the power-in operation of the winch.
Winch Power-Out Button: Press to control the power-out operation of the winch.
Power (72” long red) Cable
Ground (Black) Wire
Wired Function
1.
A
F2
=
Negative (72” long black) Cable
103484A7
103484A7
5
6
Powered by FlippingBook