Winch Installation to fixed location
Caution Winch Failure Hazard Failure to observe these instructions could lead to minor or moderate injury. Always choose a mounting location that is sufficiently strong to withstand the loads you intend to winch
The 4000 can be mounted to a fixed location by utilizing the mounting hole pattern for the winch unit. First, choose a mounting location that is sufficiently strong enough to withstand the loads you intend to winch. Next, drill three hole to the dimensions specified in the drawing below.
To secure the winch, always use:
▫ A flat, secure mounting location at least 3/16in. (4.8 mm) thick steel. ▫ 3/8 in. flat washer x 3. ▫ 3/8 in. lockwasher x 3. ▫ 3/8-16 x 1in. long, hex head capscrew, Grade 5 or better x 3. ▫ Torque mounting bolts to 30-35 ft-lbs (41-47 Nm ).
Bolt length may need to be longer that specified above depending upon the thickness of the material the winch is mounted to.
PAGE 8
91729A1
Powered by FlippingBook