1.4 Motor does not run.
Faulty Trigger Switch
Repair or replace Switch
Defective Motor
Replace Motor
Loose connection of the Wires to the Motor terminals.
Secure the Motor terminal and Wires.
1.5 Electrical sparks appear around Motor.
Switch held in power in position while PullzAll is stalled.
Replace Wiring harness PullzAll Motor.
1.6 Wiring harness insulation has melted.
Poor installation caused Wire insulation to be rubbed off or cut, causing direct short.
Replace Wire harness or Motor Assembly.
1.7 PullzAll makes squeaking / high pitch noise.
Drum Bushing not lubricated. Grease Drum Bushings.
1.8 Malfunctioning
Not operating correctly.
Cease operation. Diagnose, Repair or Replace.
1.9 Full speed only, no variable speed control
Ensure trigger is only partially depressed
Replace Variable Speed Trigger switch
INSPECTION
VISUAL INSPECTION:
• While disconnecting the connectors, never pull the wiring Harnesses. Unlock the connector
first and then pull them apart by holding connectors themselves.
• While connecting connectors, also hold connectors and put them together until they lock
securely (a click is heard).
• While Installing the Wiring Harness, fix it with clamps so that no slack is left.
987605A1
Page 48 of 49
Powered by FlippingBook