8. Use 2 Retaining Rings to lock Power Cord with the Plastic Housing in opposite direction.
9. Install Rocker Switch to Right Plastic Cover and connect corresponding lead Wires.
2.9.3 INSPECTION OF WIRING
Visual Inspection
•
• Ensure that Switches have assembled correctly. Wiring is complete match the drawing and pin-out table for corresponding switch.
• Ensure that Wiring has not jammed in Housing. Direction Switches slider assembled correctly.
• Ensure green Ground wire is securely attached to chassis.
987605A1
Page 43 of 49
Powered by FlippingBook