Winch Installation to fixed location
Caution Winch Failure Hazard Failure to observe these instructions could lead to minor or moderate injury. Always choose a mounting location that is sufficiently strong to withstand the loads you intend to winch
5/16" [7.94 mm] DIA (2 plcs)
The 2000 can be mounted to a fixed location by utilizing the mounting hole pattern for the winch unit. First, choose a mounting location that is sufficiently strong enough to withstand the loads you intend to winch.
3.1" [78.7 mm]
Next, drill two hole to the dimensions specified in the drawing below.
To secure the winch, always use:
A flat, secure mounting location at
▫
least 3/16 in. (4.8 mm) thick steel.
5/16 in. flat washer x 2.
▫
5/16 in. lockwasher x 2.
▫
5/16-18 x 1in. long, hex head
▫
capscrew, Grade 5 or better x 2.
Torque mounting bolts to 12 ft-lbs
▫
(16.3 Nm ).
Bolt length may need to be longer that specified above depending upon the thickness of the material the winch is mounted to.
PAGE 8
91728A0
Powered by FlippingBook